Slurry Pumps
STORTH have developed the most versatile range of slurry pumps to cope with everything from the small farmers needs to the contractor's range.
High performance, reliability and the highest standard of engineering are the reasons why sales of these exceptional value for money STORTH slurry pumps continue to escalate.
Super Jet 1 pump
Super Jet 1 pump is a static model which delivers slurry straight from the impeller drum up to the 5" male bauer discharge fitting. Depths are available from 5ft to 14 ft, 60 to 70 hp is required delivering 2500 gallons per minute
Super Jet 2 pump
Super Jet 2 pump is a static model with a under surface agitator fitted on the main delivery tube to divert slurry causing a high pressure jet for agitation. Moving a handle at the pump head diverts slurry up to the 5" male bauer discharge fitting. Different depths are available from 5ft to 14 ft 60 to 70 hp required delivering 2500 gallons per minute
Super Jet 3 pump
Super Jet 3 pump is quick attach to tractor arms with no top link required allowing easy movement from pit to pit. From the tractor seat a double acting ram allows the pump to be used in different depth pits. Also this pump has an undersurface agitator fitted to the main delivery tube with a wide arc to allow agitation underneath the tractor, moving a handle at the pump head diverts slurry up to the 5" male bauer discharge. Depths available are 6ft - 8ft and 8ft - 10 ft, 80 to 100 hp required delivering 3000 gallons per minute
Super Jet 4
Super Jet 4 Pump is fully mounted to the tractor using the top link and quick attach lower link enabling the PTO to be left connected when moving from pit to pit. A tilt ram gives full control of the machine enabling the pump to access awkward tank holes. The pump can operate in various depth pits as it is being carried on the tractor linkage which can move the pump up and down. The machine is fitted with an under surface agitator which gives a wide mixing arc. The pump is also fitted with four blade impellor and a heavy duty gear box. The discharge pipe is 5" male bauer. 80-100hp is required giving a capacity of up to 3,500 gallons per minute.
Super Jet 5
Super Jet 5 pump regarded as the highest performing pump in the STORTH range. Designed for the progressive farmer and the contractor, this pump has been manufactured with strength, upgraded drive impellor and a large heavy duty gear box to withstand continuous mixing and pumping for hours. 6" discharge allows this pump to product 4000 gallons of slurry per minute to the pump head. Super Jet 5 comes into it's own for agitation, causing high pressure for immense mixing performance. height adjustment on the agitator is controlled from the tractor seat by a hydraulic ram, lockable in 28 positions increasing a wider mixing arc to mix underneath the tractor. Quick attach and hydraulic top link make it easy to move from pit to pit without disconnecting the PTO.
Electric Slurry pumps
Electric Slurry pumps are fitted with a 3ph 22kw motor with option to have a undersurface agitator. Available depths range from 5ft to 14 ft. Discharge fitting is a 4" male bauer delivering 1000 gallons per minute.
The control panel is fitted with level sensors allowing for automatic or manual stop start.
6" Re-Circulation Pumps
These enable mixing of slurry storage tanks or lagoons which hold a head of slurry which feeds the 6" inlet pipe. With the tractor in 1000RPM will discharge the slurry through the outlet on the pump back to the storage tank giving great mixing power. The machine is fully galvanised on a 3 point linkage frame. 6 blades make up the impellor with a synthetic rubber bearing in the drum housing and a 2" blockhoused bearing at the PTO end.
FEATURES THROUGHOUT THE RANGE
- All models are fully galvanised
- Discharge coupling male bauer 5"
- Heavy duty gearboxes proven over 25 years
- Shear-bolt on universal joint between gearbox and impeller shaft
- At the top of the impeller shaft a Blockhoused bearing is used to ensure smooth running
- Under surface agitator bolted in for precision fit and no false discharge
- At the bottom of impeller shaft a proven rubber bearing is used which is lubricated by slurry
- The impeller housing has been designed to cope with the thickest of slurry and provide a consistent flow
- Six blades on impeller
- Protruding blades on the impeller break up solids when entering the drum housing